Spray foam roofing differs from traditional roofing systems in both structure and performance. It uses a liquid-applied polyurethane foam that expands into a solid, seamless barrier, providing both insulation and weather protection. Traditional systems like asphalt shingles or metal panels rely on layered, mechanical assembly that can leave gaps vulnerable to moisture and air intrusion. […]
Spray foam insulation is recommended for exterior walls because it forms an airtight, moisture-resistant barrier that significantly improves thermal performance compared to traditional materials. Closed-cell spray foam, in particular, adds structural strength and delivers one of the highest R-values per inch. These qualities are especially relevant in Seattle’s mixed marine climate, where temperature swings, high […]
In Seattle, the best season to install spray foam insulation is late spring through early fall. During this window, temperatures typically range from 60°F to 80°F, aligning with optimal curing conditions for both open-cell and closed-cell foam products. These moderate, consistent temperatures reduce the risk of condensation during application and allow the foam to expand […]
Spray foam insulation significantly reduces the risk of mold and moisture damage by forming an airtight barrier that limits water vapor movement and condensation. This is particularly effective in Seattle, where damp conditions and frequent rainfall create ideal conditions for mold growth in uninsulated or poorly sealed structures. Closed-cell spray foam resists water infiltration while […]
Spray foam insulation is not fully waterproof, but closed-cell spray foam is water-resistant and can act as a moisture barrier under specific conditions. Open-cell spray foam, by contrast, is not water-resistant and will absorb water, making it unsuitable for areas prone to moisture or direct water contact. The key factor is the type of spray […]
Understand Pricing. Maximize Savings. The average cost of spray foam insulation in the Seattle area ranges between $2.50 and $7.00 per square foot, depending on the type (open-cell vs. closed-cell), project complexity, and area covered. For a typical 2,000 sq. ft. home, full insulation can run between $5,000 and $14,000—but the long-term savings on energy […]
When it comes to improving your home’s energy efficiency, attic insulation is one of the most effective upgrades you can make. Properly insulated attics help regulate temperature, reduce energy waste, and lower your monthly utility bills. Cascadia Spray Foam of Seattle specializes in energy-efficient solutions, particularly spray foam insulation, to enhance the performance of homes […]
Pest invasions in Seattle homes often start with a weak point: poorly insulated exteriors. At Cascadia Spray Foam of Seattle, we know that high-quality exterior spray foam insulation not only boosts energy efficiency—it also acts as a powerful barrier against unwanted pests like rodents, ants, and spiders. Here’s the core solution: Closed-cell spray foam insulation […]
If you live in Burien, you know how much of a difference a well-insulated home can make—especially when it’s pouring outside or freezing in the early mornings. But when it’s time to upgrade or install new insulation, most homeowners are faced with a familiar question: Do I go with spray foam or stick to traditional […]
Thinking about using open-cell spray foam in your Seattle home’s walls or ceilings? With our damp climate and older homes, Seattle presents unique insulation challenges. At Cascadia Spray Foam, we’ve helped hundreds of homeowners cut energy loss and reduce noise using cost-effective, high-expansion open-cell foam. This guide explains when open-cell spray foam is the right […]